MIX TAGS

Namaz Ka Waqt Kya Hai

Namaz ka waqt din mein aur raat mein muqarar hai. Namaz ki timing Islam ke mutabiq mukhtalif hai aur ye geographic location par bhi depend karti hai. Yahan kuch general guidelines hain:

Fajr (Subh Sadiq): Fajr namaz ka waqt Suraj nikalne se pehle hota hai. Ye Subah ke waqt ka pehla namaz hai.

Dhuhr (Zuhr): Dhuhr namaz ka waqt Suraj ke neeche hone ke baad shuru hota hai, aur ye dopahar ke waqt ka namaz hai.

Asr: Asr namaz ka waqt Dhuhr ke baad shuru hota hai aur Suraj ast hote hote hai.

Maghrib: Maghrib namaz ka waqt Suraj dhalne ke baad hota hai, jab sham ka waqt shuru hota hai.

Isha: Isha namaz ka waqt Suraj puri tarah doob jaane ke baad hota hai, jab raat ka waqt shuru hota hai.

Namaz ka waqt masjidon mein muqarar hota hai, lekin aap apne geographic location ke hisab se bhi namaz ka waqt maloom kar sakte hain. Namaz ke waqt ka paband hona ek bahut ahem amal hai Islam mein. Namaz ki niyat karna, waqt par namaz ada karna, aur namaz mein khushu aur khuzu rakhna musalmanon ke liye zaroori hai.

Wazifa Surah Muzammil To See Prophet In Dream

 

Wazifa, or Islamic supplications and rituals, are a common practice among Muslims seeking spiritual guidance or blessings. Surah Muzammil (Chapter 73) is known for its spiritual significance, and some people believe that reciting it with sincerity and devotion may lead to blessings, including the opportunity to see the Prophet Muhammad (peace be upon him) in a dream.

Here is a suggested method for performing this wazifa:

Choose a Clean and Quiet Place:
Select a clean and quiet place where you can concentrate without distractions.

Perform Wudu (Ablution):
Before starting any supplication or recitation, perform ablution to ensure cleanliness.

Recite Surah Muzammil:
Begin by reciting Surah Muzammil. Try to recite it with sincerity, humility, and understanding of its meaning.

Make Dua (Supplication):
After reciting the surah, make dua (supplication) to Allah with humility and sincerity. Ask for His blessings, guidance, and, if it is His will, the opportunity to see the Prophet Muhammad (peace be upon him) in a dream.

Repeat Regularly:
Consistency is important in wazifa. It’s recommended to perform this wazifa regularly, preferably at the same time each day. The sincerity of your intention and the regularity of your practice are essential aspects of the process.

Maintain Good Deeds and Morality:
Along with reciting Surah Muzammil, it’s important to maintain good deeds, follow Islamic teachings, and strive to be a better person. Acts of kindness, charity, and adherence to Islamic principles can enhance the effectiveness of your supplication.

Remember that dreams are a complex phenomenon and not guaranteed by any specific ritual. It’s crucial to approach such practices with the right intentions and an understanding that outcomes are ultimately in the hands of Allah. Additionally, consulting with a knowledgeable religious scholar or an Imam for guidance on religious matters is always recommended.

 

 

how-to-create-a-new-folder-on-windows-10

 

Creating a new folder on Windows 10 is a straightforward process. Here’s how you can do it:

  1. On the Desktop:
    • Right-click on an empty space on your desktop.
    • Hover your mouse over “New.”
    • Select “Folder.”
  2. Using File Explorer:
    • Open File Explorer by pressing Windows key + E or clicking on the File Explorer icon in the taskbar.
    • Navigate to the location where you want to create a new folder.
    • Right-click on an empty space within the File Explorer window.
    • Hover your mouse over “New.”
    • Select “Folder.”
  3. Using Keyboard Shortcuts:
    • Navigate to the location where you want to create a new folder in File Explorer.
    • Press Ctrl + Shift + N together. This keyboard shortcut creates a new folder at the current location.
  4. In a Command Prompt or PowerShell:
    • Open Command Prompt or PowerShell.
    • Navigate to the directory where you want to create a new folder.
    • Type mkdir NewFolderName and press Enter. Replace “NewFolderName” with the desired name of your new folder.
  5. On the Start Menu:
    • Click on the Start button to open the Start Menu.
    • Scroll down or click on “All apps.”
    • Find and open the “Windows System” folder.
    • Open “File Explorer.”
    • Navigate to the location where you want to create a new folder and follow the steps mentioned above.

Choose the method that is most convenient for you. After creating the new folder, you can rename it by right-clicking on it and selecting “Rename.”

 

 

fix-the-system-file-is-not-suitable-for-running-ms-dos-and-microsoft-windows-applications-on-windows

The error message “The system file is not suitable for running MS-DOS and Microsoft Windows applications” typically indicates an issue with the compatibility mode settings for a particular file or program. Here are steps to troubleshoot and resolve this issue:

  1. Compatibility Mode:
    • Right-click on the executable file that’s giving the error.
    • Choose “Properties” from the context menu.
    • Go to the “Compatibility” tab.
    • Under the Compatibility mode section, uncheck any boxes that are selected.
    • Click “Apply” and then “OK” to save the changes.
  2. Run as Administrator:
    • Right-click on the executable file.
    • Select “Run as administrator” from the context menu.
    • If prompted, click “Yes” to allow the program to make changes to your device.
  3. Update or Reinstall the Application:
    • Check if there is an updated version of the application available from the official website.
    • If an update is not available or doesn’t resolve the issue, consider reinstalling the application.
  4. Check for System File Corruption:
    • Open a Command Prompt with administrative privileges (right-click on the Start button, select “Command Prompt (Admin)”).
    • Type the following command and press Enter: sfc /scannow
    • This command will scan and attempt to repair system file integrity issues.
  5. Run Troubleshooters:
    • Open Settings by pressing Windows key + I.
    • Go to “Update & Security” > “Troubleshoot.”
    • Run the “Windows Store Apps” troubleshooter.
  6. Check Compatibility Mode for the Entire System:
    • Right-click on the executable file.
    • Choose “Properties.”
    • Go to the “Compatibility” tab.
    • Under the Compatibility mode section, uncheck any boxes that are selected.
    • Click “Change settings for all users” and repeat the process for all users.
    • Click “Apply” and then “OK” to save the changes.
  7. Verify System Integrity:
    • Open Command Prompt with administrative privileges.
    • Type the following command and press Enter: dism /online /cleanup-image /restorehealth
    • This command will attempt to repair the Windows image.

After trying these steps, check if the issue persists. If the problem continues, you may want to seek assistance from the official support channels of the software or consider reaching out to Microsoft support.

 

 

unzip-multiple-files-in-one-click-windows-10

 

In Windows 10, you can unzip multiple files in one click using the built-in File Explorer feature or third-party software. Here are steps for both methods:

Using File Explorer (Built-in):

  1. Select the Files:
    • Navigate to the folder containing the ZIP files.
    • Select all the ZIP files that you want to unzip. You can do this by holding down the Ctrl key and clicking on each file.
  2. Extract All:
    • Right-click on one of the selected ZIP files.
    • From the context menu, choose “Extract All…”
  3. Choose Destination:
    • In the “Extract Compressed (Zipped) Folders” wizard, select a destination for the extracted files.
    • Check the option “Show extracted files when complete” if you want File Explorer to open the extracted folder automatically.
  4. Complete Extraction:
    • Click “Extract” to start the extraction process.

Using Third-Party Software:

If you prefer more advanced features, you can use third-party software like 7-Zip, WinRAR, or WinZip. Here’s a general guide using 7-Zip:

  1. Install 7-Zip:
    • If you don’t have 7-Zip installed, you can download it from the official website and install it.
  2. Select Files:
    • Navigate to the folder containing the ZIP files.
    • Select all the ZIP files you want to extract.
  3. Right-Click and Use 7-Zip:
    • Right-click on one of the selected ZIP files.
    • From the context menu, choose the “7-Zip” submenu, and then select “Extract to [Folder Name]/.”
  4. Complete Extraction:
    • 7-Zip will create a new folder with the extracted files.

Choose the method that suits your preferences and workflow. File Explorer is convenient for basic tasks, while third-party tools like 7-Zip offer more options and customization.

 

how-to-fix-inaccessible-grayed-out-settings-on-windows-11

 

If your settings in Windows 11 are inaccessible or grayed out, it could be due to various reasons, including system glitches, permissions issues, or software conflicts. Here are some steps you can take to fix inaccessible or grayed-out settings:

1. Restart Your Computer:

  • Sometimes, a simple restart can resolve temporary issues.

2. Run Windows Update:

  • Make sure your system is up-to-date. Go to Settings > Windows Update and check for updates.

3. Check User Account Control (UAC) Settings:

  • Go to Settings > Privacy & Security > Windows Security.
  • Click on “Virus & Threat Protection” and then on “Manage settings.”
  • Make sure the UAC is turned on.

4. Run SFC (System File Checker) Scan:

  • Open Command Prompt as an administrator.
  • Type sfc /scannow and press Enter.
  • Allow the scan to complete and follow any on-screen instructions.

5. Check Group Policy Settings:

  • Press Windows key + R to open the Run dialog.
  • Type gpedit.msc and press Enter.
  • Navigate to User Configuration > Administrative Templates > Control Panel.
  • Look for settings that might be affecting the options you are trying to access.

6. Check Registry Settings:

  • Press Windows key + R to open the Run dialog.
  • Type regedit and press Enter.
  • Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer.
  • Look for entries that might be affecting settings.

7. Create a New User Account:

  • Create a new user account with administrative privileges.
  • Log in to the new account and check if the settings are accessible.

8. Perform a System Restore:

  • If the issue started recently, consider using System Restore to revert your system to a previous state.

9. Check for Third-Party Software Conflicts:

  • Some third-party applications may interfere with system settings. Try disabling or uninstalling recently installed software.

10. Reset PC:

  • As a last resort, you can perform a PC reset, which reinstalls Windows but keeps your personal files intact.

11. Contact Support:

  • If none of the above steps resolve the issue, consider reaching out to Microsoft Support for assistance.

Before making significant changes, it’s advisable to create a system restore point or back up important data to avoid data loss.

 

 

 

 

 

 

 

Leave a Reply